If you have carpet in the home, then you are fully aware at how difficult it can be to keep it clean and fresh. However, it’s not impossible. Perhaps you have tried one or two of the following techniques, with less than favorable results. Then again, it’s possible that you were given incomplete or faulty instructions on how to do it. Read on to learn 3 ways to effectively clean your carpet or area rugs.
1. Carpet Shampoo or Foam Cleanser
Perhaps the most popular method is a carpet shampoo. It’s cost effective, easy enough to be a do-it-yourself project, and often works well to clean mild to moderately soiled carpets. Simply apply the shampoo or foam solution to your carpet, which attaches to dirt particles. After allowing it to set, the dried substance separates the particles from the fibers in the carpet and makes it easy to vacuum up the dirt.
So, you just need a vacuum, a little time, and a good carpet shampoo. There are many on the market to choose from, so do your research to find one that will work for your carpet.
2. Hot Water Extraction
This is otherwise known as steam cleaning, another popular choice for cleaning carpets. Contrary to what it is often called, it doesn’t use steam. Instead, this method utilizes hot water, with temperatures up to 200 degrees. Spraying the hot water into the carpet with pressure will loosen up particles within the fibers. The machine used in this method acts like a vacuum to remove the loosened particles from the carpet. Typically the water is mixed with a cleansing agent.
You have a couple of options with this process, and one is to hire a professional to come into the home to clean the carpets. Another option would be to either buy your own machine, or rent one. However, one thing to consider is that this method is often higher in cost than the others.
3. Dry Powder Solution
While this method is called “dry”, a little water is involved. However, it’s a very small amount and should not dampen the carpet. You mix the dry powder agent, which is a very absorbent detergent, with water and then scatter the mixture over your carpet or rug. Using a machine with rotating brushes, the mixture is dispersed throughout the fibers in the carpet and left on for approximately 15 minutes. It is then vacuumed up, just as the other methods.
Some people find this as a favorable solution, because the carpet doesn’t get wet and there isn’t a need for it to dry out.
Home Remedies for Removing Stains
Between the deep cleansing, you might find yourself in need of a quick fix for a new stain, from a spilled juice, muddy paw prints, or a host of various mishaps that can spoil a clean carpet. So, take a look at the following home remedies to help you remove stains:
- Vinegar/Lemon Juice/Borax – If you make a paste-like substance by mixing equal parts of the vinegar and Borax, with just a few drops of the juice, apply it to the stained area. When dry, vacuum up, or wash more thoroughly with detergent.
- White Vinegar/Detergent/Water – Mix equal part of all 3 ingredients, and then scrub it into the carpet using a brush. Rinse it with lukewarm water.
Both of these home remedies can safely remove a new stain, while deep cleanings could be done about 1-2 times a year, depending on the amount of traffic your carpet gets throughout the year.
Author Bio: Anu is a work at home mom. When she isn’t spending time with her kids, she likes to provide useful information at her website and has reviewed the Bissell Carpet Cleaner. Read why she rates it as the number 1 carpet cleaner on the market today.